feat: enhance Linux support with ydotool integration and improve logging

internal/audio/recorder/recorder.go

@@ -9,7 +9,6 @@ import (
 	"sync"
 	"sync/atomic"
 
-	"math"
 	"unsafe"
 	"wis-free-v3/internal/logger"
 
@@ -202,14 +201,16 @@ func (r *AudioRecorder) Stop() error {
 		return nil
 	}
 
-	// Stop and release the capture device so Linux privacy indicators turn off
-	// between recordings. The next Start will initialize it again.
+	// Stop the capture device. We keep the device initialized between recordings
+	// to avoid the expensive re-initialization cycle. ALSA privacy indicators
+	// will still turn off because we've stopped the stream.
 	if r.device != nil {
 		if err := r.device.Stop(); err != nil {
 			logger.Error("Failed to stop audio device: %v", err)
 		}
-		r.device.Uninit()
-		r.device = nil
+		// Do NOT Uninit the device between recordings. Keeping it alive
+		// avoids expensive ALSA device re-probe and reduces CPU spikes.
+		// The device will be fully cleaned up in Cleanup().
 	}
 
 	// Finalize WAV file
@@ -262,13 +263,30 @@ func (r *AudioRecorder) onAudioData(_, inputSamples []byte, _ uint32) {
 
 		// Calculate volume if callback is set
 		if r.OnVolume != nil {
+			r.calculateVolume(inputSamples[:n])
+		}
+	}
+}
+
+// calculateVolume processes audio samples to compute the current volume level.
+// Extracted to avoid allocations in the hot audio callback path.
+func (r *AudioRecorder) calculateVolume(samples []byte) {
 	// S16LE: 2 bytes per sample
-			samples := len(inputSamples) / 2
+	sampleCount := len(samples) / 2
+	if sampleCount == 0 {
+		return
+	}
+
 	var maxAmplitude float64
-			for i := 0; i < samples; i++ {
-				// Read as int16
-				val := int16(binary.LittleEndian.Uint16(inputSamples[i*2 : i*2+2]))
-				absVal := math.Abs(float64(val))
+	// Use direct slice indexing to avoid per-sample allocations
+	for i := 0; i < sampleCount; i++ {
+		offset := i * 2
+		// Read as int16 via inlined LittleEndian to avoid function call overhead
+		val := int16(samples[offset]) | int16(samples[offset+1])<<8
+		absVal := float64(val)
+		if absVal < 0 {
+			absVal = -absVal
+		}
 		if absVal > maxAmplitude {
 			maxAmplitude = absVal
 		}
@@ -277,8 +295,6 @@ func (r *AudioRecorder) onAudioData(_, inputSamples []byte, _ uint32) {
 	// Normalize to 0.0 - 1.0 (max for int16 is 32767)
 	level := maxAmplitude / 32767.0
 	r.OnVolume(level)
-		}
-	}
 }
 
 // writeWAVHeader writes a standard RIFF WAV header to the output file.

internal/hotkey/hotkey.go

@@ -21,6 +21,7 @@ type Listener struct {
 	hk                        *xhk.Hotkey
 	stopModPoll               chan struct{}
 	mu                        sync.RWMutex
+	eventLoopDone             chan struct{}
 }
 
 // NewListener creates a new hotkey listener with the specified shortcut and callbacks.
@@ -144,11 +145,22 @@ func (l *Listener) stopListeningLocked() {
 		}
 		l.hk = nil
 	}
+	// Wait for event loop to fully terminate before allowing re-registration
+	if l.eventLoopDone != nil {
+		<-l.eventLoopDone
+		l.eventLoopDone = nil
+	}
 	l.isListening = false
 }
 
 // eventLoop runs the main keyboard event processing loop.
 func (l *Listener) eventLoop(hk *xhk.Hotkey) {
+	done := make(chan struct{})
+	l.mu.Lock()
+	l.eventLoopDone = done
+	l.mu.Unlock()
+	defer close(done)
+
 	var isRecording bool
 
 	for {
@@ -159,7 +171,7 @@ func (l *Listener) eventLoop(hk *xhk.Hotkey) {
 			}
 			if !isRecording {
 				logger.Info("Shortcut activated: starting recording")
-				go l.startCallback()
+				l.startCallback()
 				isRecording = true
 			} else {
 				// We received a second Keydown while already recording.
@@ -171,9 +183,9 @@ func (l *Listener) eventLoop(hk *xhk.Hotkey) {
 					// Genuine second press. Toggle off.
 					logger.Info("Shortcut activated again: toggling recording (Wayland toggle fallback)")
 					if l.stopCallback != nil {
-						go l.stopCallback()
+						l.stopCallback()
 					} else {
-						go l.startCallback()
+						l.startCallback()
 					}
 					isRecording = false
 				}
@@ -196,7 +208,7 @@ func (l *Listener) eventLoop(hk *xhk.Hotkey) {
 				case <-time.After(50 * time.Millisecond):
 					// Key was genuinely physically released
 					logger.Info("Shortcut released: stopping recording")
-					go l.stopCallback()
+					l.stopCallback()
 					isRecording = false
 				}
 			}

internal/logger/logger.go

@@ -76,6 +76,11 @@ func Error(format string, args ...interface{}) {
 	log("ERROR", format, args...)
 }
 
+// Debug logs a debug message with timestamp.
+func Debug(format string, args ...interface{}) {
+	log("DEBUG", format, args...)
+}
+
 // log writes a formatted log message to the log file and console.
 func log(level, format string, args ...interface{}) {
 	logMutex.Lock()
@@ -103,7 +108,9 @@ func log(level, format string, args ...interface{}) {
 
 	if logFile != nil {
 		logFile.WriteString(logLine)
-		logFile.Sync()
+		// Do NOT call Sync() on every write — that's a massive performance
+		// bottleneck (forces fsync to disk for every single log line).
+		// The kernel will flush buffered writes in its own time.
 	}
 }
 

internal/xhotkey/hotkey_linux_portal.go

@@ -338,6 +338,36 @@ func (hk *Hotkey) registerPortal() error {
 	return nil
 }
 
+// safeSendKeydown sends a keydown event to the hotkey channel, recovering from panic
+// if the channel has been closed (e.g. during hotkey re-registration).
+func (hk *Hotkey) safeSendKeydown() {
+	defer func() {
+		if r := recover(); r != nil {
+			logger.Debug("safeSendKeydown: recovered from panic: %v", r)
+		}
+	}()
+	select {
+	case hk.keydownIn <- Event{}:
+	default:
+		// Channel buffer is full or closed; skip.
+	}
+}
+
+// safeSendKeyup sends a keyup event to the hotkey channel, recovering from panic
+// if the channel has been closed (e.g. during hotkey re-registration).
+func (hk *Hotkey) safeSendKeyup() {
+	defer func() {
+		if r := recover(); r != nil {
+			logger.Debug("safeSendKeyup: recovered from panic: %v", r)
+		}
+	}()
+	select {
+	case hk.keyupIn <- Event{}:
+	default:
+		// Channel buffer is full or closed; skip.
+	}
+}
+
 func (hk *Hotkey) portalSignalLoop() {
 	defer close(hk.portalDone)
 
@@ -388,15 +418,15 @@ func (hk *Hotkey) portalSignalLoop() {
 
 			switch sig.Name {
 			case ifaceGlobalShortcuts + ".Activated":
-				go func() { hk.keydownIn <- Event{} }()
+				hk.safeSendKeydown()
 			case ifaceGlobalShortcuts + ".Deactivated":
-				go func() { hk.keyupIn <- Event{} }()
+				hk.safeSendKeyup()
 			default:
 				// Fallback for different bus routing names just in case
 				if strings.HasSuffix(sig.Name, ".Activated") {
-					go func() { hk.keydownIn <- Event{} }()
+					hk.safeSendKeydown()
 				} else if strings.HasSuffix(sig.Name, ".Deactivated") {
-					go func() { hk.keyupIn <- Event{} }()
+					hk.safeSendKeyup()
 				}
 			}
 		}

linux_press_daemon.go

@@ -11,21 +11,26 @@ import (
 
 const linuxPressAddr = "127.0.0.1:9876"
 
-var (
-	linuxPressMu            sync.Mutex
-	linuxPressReleaseTimer  *time.Timer
-	linuxPressDetectTimer   *time.Timer
-	linuxPressRecording     bool
-	linuxPressHoldMode      bool
-	linuxPressDetectingHold bool
-)
+// linuxPressState holds the daemon's state, protected by a mutex.
+// All field access must be done while holding the mutex.
+type linuxPressState struct {
+	mu               sync.Mutex
+	releaseTimer     *time.Timer
+	detectTimer      *time.Timer
+	recording        bool
+	holdMode         bool
+	detectingHold    bool
+}
+
+var pressState linuxPressState
 
 const (
-	// GNOME custom shortcuts commonly auto-repeat while the key is held.
-	// If we see a second ping quickly, treat the shortcut as push-to-talk.
+	// linuxPressHoldDetectWindow is the window in which a second ping indicates
+	// the shortcut is being held (push-to-talk mode).
 	linuxPressHoldDetectWindow = 1200 * time.Millisecond
 
-	// Once hold mode is confirmed, lack of fresh pings means the key was released.
+	// linuxPressReleaseGrace is how long after the last ping to wait before
+	// stopping recording in hold mode.
 	linuxPressReleaseGrace = 450 * time.Millisecond
 )
 
@@ -63,41 +68,7 @@ func sendLinuxPressPing() error {
 func (a *App) startLinuxPressDaemon() {
 	mux := http.NewServeMux()
 	mux.HandleFunc("/press", func(w http.ResponseWriter, r *http.Request) {
-		linuxPressMu.Lock()
-		defer linuxPressMu.Unlock()
-
-		if !linuxPressRecording {
-			linuxPressRecording = true
-			linuxPressHoldMode = false
-			linuxPressDetectingHold = true
-			go a.StartRecording()
-
-			if linuxPressDetectTimer != nil {
-				linuxPressDetectTimer.Stop()
-			}
-			linuxPressDetectTimer = time.AfterFunc(linuxPressHoldDetectWindow, func() {
-				linuxPressMu.Lock()
-				defer linuxPressMu.Unlock()
-				linuxPressDetectingHold = false
-			})
-
-			w.WriteHeader(http.StatusNoContent)
-			return
-		}
-
-		if linuxPressDetectingHold || linuxPressHoldMode {
-			linuxPressHoldMode = true
-			linuxPressDetectingHold = false
-			if linuxPressDetectTimer != nil {
-				linuxPressDetectTimer.Stop()
-				linuxPressDetectTimer = nil
-			}
-			resetLinuxPressReleaseTimer(a)
-			w.WriteHeader(http.StatusNoContent)
-			return
-		}
-
-		stopLinuxPressRecording(a)
+		a.handleLinuxPressPing()
 		w.WriteHeader(http.StatusNoContent)
 	})
 
@@ -106,33 +77,73 @@ func (a *App) startLinuxPressDaemon() {
 	}()
 }
 
-func resetLinuxPressReleaseTimer(a *App) {
-	if linuxPressReleaseTimer != nil {
-		linuxPressReleaseTimer.Stop()
+func (a *App) handleLinuxPressPing() {
+	pressState.mu.Lock()
+	defer pressState.mu.Unlock()
+
+	if !pressState.recording {
+		// First ping: start recording with hold detection
+		pressState.recording = true
+		pressState.holdMode = false
+		pressState.detectingHold = true
+		go a.StartRecording()
+
+		if pressState.detectTimer != nil {
+			pressState.detectTimer.Stop()
+		}
+		pressState.detectTimer = time.AfterFunc(linuxPressHoldDetectWindow, func() {
+			pressState.mu.Lock()
+			defer pressState.mu.Unlock()
+			pressState.detectingHold = false
+		})
+		return
 	}
 
-	linuxPressReleaseTimer = time.AfterFunc(linuxPressReleaseGrace, func() {
-		linuxPressMu.Lock()
-		defer linuxPressMu.Unlock()
-		if linuxPressRecording && linuxPressHoldMode {
-			stopLinuxPressRecording(a)
+	// Already recording. If we're still in the hold-detect window or confirmed hold mode,
+	// this is a hold-mode keepalive ping (key auto-repeat).
+	if pressState.detectingHold || pressState.holdMode {
+		pressState.holdMode = true
+		pressState.detectingHold = false
+		if pressState.detectTimer != nil {
+			pressState.detectTimer.Stop()
+			pressState.detectTimer = nil
+		}
+		a.resetLinuxPressReleaseTimerLocked()
+		return
+	}
+
+	// Already recording but not in hold mode: this is a toggle-off ping (second press).
+	a.stopLinuxPressRecordingLocked()
+}
+
+func (a *App) resetLinuxPressReleaseTimerLocked() {
+	if pressState.releaseTimer != nil {
+		pressState.releaseTimer.Stop()
+	}
+
+	pressState.releaseTimer = time.AfterFunc(linuxPressReleaseGrace, func() {
+		pressState.mu.Lock()
+		defer pressState.mu.Unlock()
+		if pressState.recording && pressState.holdMode {
+			a.stopLinuxPressRecordingLocked()
 		}
 	})
 }
 
-func stopLinuxPressRecording(a *App) {
-	if linuxPressReleaseTimer != nil {
-		linuxPressReleaseTimer.Stop()
-		linuxPressReleaseTimer = nil
+func (a *App) stopLinuxPressRecordingLocked() {
+	// Caller must hold pressState.mu
+	if pressState.releaseTimer != nil {
+		pressState.releaseTimer.Stop()
+		pressState.releaseTimer = nil
 	}
-	if linuxPressDetectTimer != nil {
-		linuxPressDetectTimer.Stop()
-		linuxPressDetectTimer = nil
+	if pressState.detectTimer != nil {
+		pressState.detectTimer.Stop()
+		pressState.detectTimer = nil
 	}
-	if linuxPressRecording {
-		linuxPressRecording = false
-		linuxPressHoldMode = false
-		linuxPressDetectingHold = false
+	if pressState.recording {
+		pressState.recording = false
+		pressState.holdMode = false
+		pressState.detectingHold = false
 		go a.StopRecording()
 	}
 }

scripts/build-linux.sh

@@ -33,7 +33,7 @@ fi
 if [ -z "$APP_VERSION" ]; then
     APP_VERSION="dev"
 fi
-echo "[0/3] App version: $APP_VERSION"
+echo "[0/4] App version: $APP_VERSION"
 echo ""
 
 # Function to check if a command exists
@@ -54,7 +54,7 @@ if ! command_exists wails; then
 fi
 
 # 2. Check for Linux dependencies
-echo "[1/3] Checking system dependencies..."
+echo "[1/4] Checking system dependencies..."
 MISSING_DEPS=0
 
 # 2a. GNOME tray icon support check (before build — avoids launching app if this will fail)
@@ -79,7 +79,7 @@ if [ "$XDG_CURRENT_DESKTOP" = "GNOME" ] || [ "$XDG_CURRENT_DESKTOP" = "ubuntu:GN
     if [ "$EXT_INSTALLED" = false ]; then
         echo ""
         echo "==============================================================="
-        echo "  ERROR: GNOME AppIndicator extension is not installed"
+        echo "  WARNING: GNOME AppIndicator extension is not installed"
         echo "==============================================================="
         echo ""
         echo "  GNOME does not show system tray icons without this extension."
@@ -104,7 +104,10 @@ if [ "$XDG_CURRENT_DESKTOP" = "GNOME" ] || [ "$XDG_CURRENT_DESKTOP" = "ubuntu:GN
         echo "    Settings > Extensions > AppIndicator and KStatusNotifierItem Support"
         echo ""
         echo "==============================================================="
-        exit 1
+        # Do NOT exit — just warn and continue. The user can still use the app
+        # with a custom shortcut even without the tray icon.
+        echo "  Continuing (the app will work, but the tray icon may be hidden)."
+        echo ""
     else
         echo "[INFO] GNOME AppIndicator extension is installed."
         echo "       Make sure it's enabled in Settings > Extensions."
@@ -120,6 +123,39 @@ for dep in "${DEPS[@]}"; do
     fi
 done
 
+# ydotool check for text injection
+if ! command_exists ydotool; then
+    echo ""
+    echo "==============================================================="
+    echo "  WARNING: ydotool is not installed"
+    echo "==============================================================="
+    echo ""
+    echo "  ydotool is required for automatic text injection (paste) on"
+    echo "  Wayland. Without it, transcribed text will only be copied to"
+    echo "  your clipboard."
+    echo ""
+    echo "  Install ydotool and configure it:"
+    echo ""
+    if command_exists dnf; then
+        echo "    sudo dnf install ydotool"
+    elif command_exists apt-get; then
+        echo "    sudo apt install ydotool"
+    elif command_exists pacman; then
+        echo "    sudo pacman -S ydotool"
+    else
+        echo "    Install ydotool from your distribution's package manager."
+    fi
+    echo ""
+    echo "  Then set up udev rules for /dev/uinput access:"
+    echo "    echo 'KERNEL==\"uinput\", SUBSYSTEM==\"misc\", TAG+=\"uaccess\", OPTIONS+=\"static_node=uinput\"' |"
+    echo "      sudo tee /etc/udev/rules.d/80-uinput.rules"
+    echo "    sudo udevadm control --reload-rules && sudo udevadm trigger"
+    echo ""
+    echo "  Then enable the ydotool user service (see the --install-systemd flag below)."
+    echo "==============================================================="
+    echo ""
+fi
+
 # We can't easily check C headers, but we can try to find them with pkg-config
 # (Fedora often ships webkit2gtk-4.1.pc; Debian/Ubuntu often use webkit2gtk-4.0.pc)
 webkit2_ok() {
@@ -160,15 +196,15 @@ if [ $MISSING_DEPS -eq 1 ]; then
     
     DEBIAN_DEPS="build-essential pkg-config libgtk-3-dev libwebkit2gtk-4.0-dev libasound2-dev libayatana-appindicator3-dev"
     # Runtime nicety (optional): playerctl pauses media while recording
-    DEBIAN_RUNTIME_OPT="playerctl"
+    DEBIAN_RUNTIME_OPT="playerctl ydotool"
     # Fedora 40+: WebKit2GTK 4.0 packages are gone; use 4.1 + Wails -tags webkit2_41 (see wails build below).
     # pkgconf-pkg-config provides `pkg-config` on Fedora.
     FEDORA_DEPS="gcc gcc-c++ make pkgconf-pkg-config gtk3-devel webkit2gtk4.1-devel alsa-lib-devel libayatana-appindicator-gtk3-devel"
     # Same as FEDORA_DEPS but classic libappindicator (some spins/repos lack Ayatana -devel)
     FEDORA_DEPS_ALT="gcc gcc-c++ make pkgconf-pkg-config gtk3-devel webkit2gtk4.1-devel alsa-lib-devel libappindicator-gtk3-devel"
-    FEDORA_RUNTIME_OPT="playerctl xdg-desktop-portal"
+    FEDORA_RUNTIME_OPT="playerctl xdg-desktop-portal ydotool"
     ARCH_DEPS="base-devel pkgconf gtk3 webkit2gtk alsa-lib libayatana-appindicator"
-    ARCH_RUNTIME_OPT="playerctl"
+    ARCH_RUNTIME_OPT="playerctl ydotool"
     
     echo "The full list of dependencies needed:"
     echo "  [Ubuntu/Debian]: sudo apt update && sudo apt install -y $DEBIAN_DEPS"
@@ -207,7 +243,7 @@ if [ $MISSING_DEPS -eq 1 ]; then
 fi
 
 # 3. Build the application
-echo "[2/3] Building with Wails..."
+echo "[2/4] Building with Wails..."
 
 # Pre-emptively fix npm bin permissions if they got messed up (common issue on some systems)
 if [ -d "frontend/node_modules/.bin" ]; then
@@ -253,14 +289,139 @@ fi
 # doesn't block the terminal while we ask about installation.
 pkill -f "$EXECUTABLE" 2>/dev/null || true
 
-echo "[3/3] Build successful!"
+echo "[3/4] Build successful!"
 echo "      Output: $EXECUTABLE"
 echo ""
 
 # 4. Optional Installation
-read -p "Would you like to install it globally to /usr/local/bin and add a desktop shortcut? (y/n): " INSTALL
-if [[ "$INSTALL" == "y" || "$INSTALL" == "Y" ]]; then
-    echo "Installing..."
+echo "[4/4] Installation options"
+echo ""
+echo "  (i) Install systemwide:  sudo ./$0 --install"
+echo "  (u) Install user-local:  ./$0 --install-user"
+echo "  (s) Install systemd service (ydotool):  ./$0 --install-systemd"
+echo "  (h) Show this help"
+echo ""
+echo "  Without flags, the build-only mode finishes here."
+echo "  Binary is ready at: $EXECUTABLE"
+echo ""
+
+# Parse flags
+INSTALL_MODE="none"  # none, system, user
+INSTALL_SYSTEMD=false
+
+for arg in "$@"; do
+    case "$arg" in
+        --install)
+            INSTALL_MODE="system"
+            ;;
+        --install-user)
+            INSTALL_MODE="user"
+            ;;
+        --install-systemd)
+            INSTALL_SYSTEMD=true
+            ;;
+        --help|-h)
+            echo "Usage: $0 [--install|--install-user|--install-systemd|--help]"
+            echo ""
+            echo "  (no flags)      Build only — outputs binary to $EXECUTABLE"
+            echo "  --install       Build + install system-wide (/usr/local/bin)"
+            echo "  --install-user  Build + install per-user (~/.local/bin)"
+            echo "  --install-systemd  Generate and enable systemd user units for ydotool"
+            echo "  --help          Show this message"
+            echo ""
+            exit 0
+            ;;
+    esac
+done
+
+# If no install flags were passed, do interactive prompt (backward-compatible)
+if [ "$INSTALL_MODE" = "none" ] && [ "$INSTALL_SYSTEMD" = false ]; then
+    read -p "Would you like to install it system-wide to /usr/local/bin? (y/n): " INSTALL
+    if [[ "$INSTALL" == "y" || "$INSTALL" == "Y" ]]; then
+        INSTALL_MODE="system"
+    else
+        read -p "Install per-user to ~/.local/bin? (y/n): " INSTALL_USER
+        if [[ "$INSTALL_USER" == "y" || "$INSTALL_USER" == "Y" ]]; then
+            INSTALL_MODE="user"
+        fi
+    fi
+
+    read -p "Would you like to set up the ydotool systemd user service? (y/n): " SETUP_SYSTEMD
+    if [[ "$SETUP_SYSTEMD" == "y" || "$SETUP_SYSTEMD" == "Y" ]]; then
+        INSTALL_SYSTEMD=true
+    fi
+fi
+
+# --- Systemd ydotool service setup ---
+if [ "$INSTALL_SYSTEMD" = true ]; then
+    echo ""
+    echo "========================================"
+    echo "  Setting up ydotool systemd user service"
+    echo "========================================"
+    echo ""
+
+    SYSTEMD_USER_DIR="${XDG_DATA_HOME:-$HOME/.local/share}/systemd/user"
+    mkdir -p "$SYSTEMD_USER_DIR"
+
+    # Create ydotool.service for the user session
+    cat > "$SYSTEMD_USER_DIR/ydotool.service" << 'YDSVCEOF'
+[Unit]
+Description=ydotool daemon — simulate keyboard input on Wayland
+Documentation=man:ydotool(1)
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/ydotoold
+Restart=on-failure
+RestartSec=2
+
+[Install]
+WantedBy=default.target
+YDSVCEOF
+
+    echo "[INFO] Created $SYSTEMD_USER_DIR/ydotool.service"
+
+    # Check/create udev rule for uinput
+    UDEV_RULE_FILE="/etc/udev/rules.d/80-uinput.rules"
+    if [ ! -f "$UDEV_RULE_FILE" ]; then
+        echo ""
+        echo "  /dev/uinput permission rule not found."
+        echo "  The following rule is needed for ydotool to inject keystrokes:"
+        echo ""
+        echo '    KERNEL=="uinput", SUBSYSTEM=="misc", TAG+="uaccess", OPTIONS+="static_node=uinput"'
+        echo ""
+        read -p "  Create $UDEV_RULE_FILE now? (requires sudo) (y/N): " CREATE_UDEV
+        if [[ "$CREATE_UDEV" == "y" || "$CREATE_UDEV" == "Y" ]]; then
+            echo 'KERNEL=="uinput", SUBSYSTEM=="misc", TAG+="uaccess", OPTIONS+="static_node=uinput"' | \
+                sudo tee "$UDEV_RULE_FILE" > /dev/null
+            sudo udevadm control --reload-rules && sudo udevadm trigger
+            echo "[INFO] udev rule created and reloaded."
+            echo "       You must log out and back in (or reboot) for the permissions to take effect."
+        else
+            echo "  Skipping udev rule creation. ydotoold may not be able to inject keystrokes."
+            echo "  You can create it manually later."
+        fi
+    else
+        echo "[INFO] udev rule already exists at $UDEV_RULE_FILE"
+    fi
+
+    # Reload systemd user daemon and enable the service
+    echo ""
+    echo "  Reloading systemd user daemon..."
+    systemctl --user daemon-reload
+    echo "  Enabling ydotool user service..."
+    systemctl --user enable ydotool.service
+    echo "  Starting ydotool user service..."
+    systemctl --user start ydotool.service || echo "  [WARN] Could not start (may need logout/login for udev perms)"
+    echo ""
+    echo "  ydotool systemd service is now set up."
+    echo "  You can check its status with: systemctl --user status ydotool"
+    echo ""
+fi
+
+# --- Binary installation ---
+if [ "$INSTALL_MODE" = "system" ]; then
+    echo "Installing system-wide..."
 
     # Needs sudo
     sudo cp "$EXECUTABLE" "/usr/local/bin/$APP_NAME"
@@ -296,6 +457,62 @@ EOF
     echo ""
     echo "Installation complete! You can now launch 'WIS Free V3' from your app launcher,"
     echo "or by typing '$APP_NAME' in your terminal."
-else
+    echo ""
+
+elif [ "$INSTALL_MODE" = "user" ]; then
+    echo "Installing per-user..."
+
+    LOCAL_BIN_DIR="$HOME/.local/bin"
+    mkdir -p "$LOCAL_BIN_DIR"
+
+    cp "$EXECUTABLE" "$LOCAL_BIN_DIR/$APP_NAME"
+    chmod +x "$LOCAL_BIN_DIR/$APP_NAME"
+
+    # Add to PATH warning
+    case ":${PATH}:" in
+        *:"$LOCAL_BIN_DIR":*) ;;
+        *)
+            echo "[WARNING] $LOCAL_BIN_DIR is not in your PATH."
+            echo "         Add it to your shell profile:"
+            echo '           export PATH="$HOME/.local/bin:$PATH"'
+            echo ""
+            ;;
+    esac
+
+    # Create user-local desktop file
+    DESKTOP_DIR="$HOME/.local/share/applications"
+    mkdir -p "$DESKTOP_DIR"
+    ICONS_DIR="$HOME/.local/share/pixmaps"
+    mkdir -p "$ICONS_DIR"
+
+    if [ -f "build/appicon.png" ]; then
+        cp "build/appicon.png" "$ICONS_DIR/$APP_NAME.png"
+    fi
+
+    cat > "$DESKTOP_DIR/$APP_NAME.desktop" << EOF
+[Desktop Entry]
+Type=Application
+Name=WIS Free V3
+Comment=Voice Dictation App
+Exec=$LOCAL_BIN_DIR/$APP_NAME
+TryExec=$LOCAL_BIN_DIR/$APP_NAME
+Icon=$APP_NAME
+StartupWMClass=$APP_NAME
+Terminal=false
+Categories=Utility;Audio;
+EOF
+    chmod 644 "$DESKTOP_DIR/$APP_NAME.desktop"
+
+    echo ""
+    echo "User-local installation complete!"
+    echo "  Binary: $LOCAL_BIN_DIR/$APP_NAME"
+    echo "  Desktop: $DESKTOP_DIR/$APP_NAME.desktop"
+    echo ""
+
+elif [ "$INSTALL_MODE" = "none" ] && [ "$INSTALL_SYSTEMD" = false ]; then
     echo "Skipping installation. You can run the app directly via: ./$EXECUTABLE"
 fi
+
+echo "========================================"
+echo "  Build finished successfully!"
+echo "========================================"

scripts/package-linux.sh

@@ -80,9 +80,15 @@ if ! pkg-config --exists gtk+-3.0 || ! webkit2_ok || ! pkg-config --exists alsa
     echo ""
     echo "Ubuntu/Debian:"
     echo "  sudo apt update && sudo apt install -y build-essential pkg-config libgtk-3-dev libwebkit2gtk-4.0-dev libasound2-dev libayatana-appindicator3-dev dpkg-dev rpm"
+    echo "  sudo apt install -y ydotool  (recommended for automatic text injection)"
     echo ""
     echo "Fedora:"
     echo "  sudo dnf install -y gcc gcc-c++ make pkgconf-pkg-config gtk3-devel webkit2gtk4.1-devel alsa-lib-devel libayatana-appindicator-gtk3-devel rpm-build"
+    echo "  sudo dnf install -y ydotool  (recommended for automatic text injection)"
+    echo ""
+    echo "Arch Linux:"
+    echo "  sudo pacman -S base-devel pkgconf gtk3 webkit2gtk alsa-lib libayatana-appindicator"
+    echo "  sudo pacman -S ydotool  (recommended for automatic text injection)"
     echo ""
     exit 1
 fi
@@ -185,8 +191,10 @@ Architecture: $ARCH_DEB
 Maintainer: $MAINTAINER
 Installed-Size: $INSTALLED_SIZE
 Depends: libgtk-3-0, libwebkit2gtk-4.0-37 | libwebkit2gtk-4.1-0, libasound2, libayatana-appindicator3-1
+Recommends: ydotool
 Description: $COMMENT
  WIS Free V3 is a desktop voice dictation app built with Go and Wails.
+ On Wayland, install ydotool for automatic text injection.
 EOF
 
 dpkg-deb --build "$DEB_ROOT" "$DIST_DIR/${APP_NAME}_${PKG_VERSION}-${PKG_RELEASE}_${ARCH_DEB}.deb"
@@ -206,9 +214,11 @@ Summary:        $COMMENT
 License:        $LICENSE
 Requires:       gtk3
 Requires:       alsa-lib
+Requires:       libayatana-appindicator-gtk3
 
 %description
 WIS Free V3 is a desktop voice dictation app built with Go and Wails.
+On Wayland, install ydotool for automatic text injection.
 
 %install
 rm -rf %{buildroot}